Grass Valley UniConfi NVISION Series v.1.3 - Manual (Page 153)

UniConfig Configuration Application • User’s Guide 141
15. Setting Gain and Inverting Polarity
Set Input Gain and Invert Polarity
6 In the ‘Mono Selection’ section, select the ‘Single’ radio button for a single input channel or
select the ‘Range’ radio button for a range of input channels.
If ‘Single’ is selected, enter the channel number in the corresponding field.
If ‘Range’ is selected, enter the channel number in the corresponding fields to the right. Enter
the beginning channel number in the left-most field and the ending channel number in the right-
most field.
7 Enter the ‘Gain’ in the field provided. Gain can be adjusted from -88 dB to 12 dB in increments
of 0.1 db.
8 Check the ‘Invert Polarity’ check box to invert polarity.
9 Click
Write Inputs
to write your changes to the control card.
10 Repeat steps 3–9 for each control card.