Grass Valley UniConfi NVISION Series v.1.3 - Manual (Page 159)

UniConfig Configuration Application • User’s Guide 147
17. Working With Salvos
Building a Salvo with Individual Takes
The ‘Connections’ window must be open to activate the needed menu options.
5 On the ‘Connections’ window, click
Read Outputs
. The input and output settings display in the
‘Salvo’ section.
6 From the menu bar, select ‘File > Save Salvo As’. The ‘Save Opened Salvo’ window appears.
7 Click
Browse
and browse to the location where you want to save the file.
8 Rename the file as needed and click
Save
.
Building a Salvo with Individual Takes
A salvo can be created using individual takes instead of an entire switching configuration.
How to Update a Salvo Using Individual Takes
1 Launch UniConfig. (See Launching UniConfig on page 9.)
2 From the menu bar, select ‘Window > Connections’. The ‘Connections’ window appears with
the ‘Salvo’ section displaying, as shown in Figure 17-3. The ‘Connections’ window must be
open to activate the needed menu options.
3 From the menu bar, select ‘Actions > Edit/Change Salvo > Add Single Take’. The ‘Edit Single
Take’ dialog box appears:
Figure 17-4. Edit Single Take Dialog Box for Salvos
4 Enter the ‘Input’ number and the ‘Output’ number of the single take you want added to the
salvo and click
Add
.
5 Repeat step 4 until all individual takes you want added have been entered. The entered takes
display in the ‘Salvo’ section on the ‘Connections’ window. (See Figure 17-3.)
6 When all takes have been added, click
Close
to close the dialog box.