Grass Valley UniConfi NVISION Series v.1.3 - Manual (Page 27)

UniConfig Configuration Application • User’s Guide 15
4. Configuration Basics
Viewing ‘Write All’ Sequence
5 From the menu bar, select ‘Tools > Options’. The ‘Configuration Options’ dialog box appears:
Figure 4-4. Configuration Options Dialog Box
6 Check the ‘Show advanced Serial EE settings’ check box. By default this box is not checked.
When checked, more options appear: .
Figure 4-5. Configuration Options Dialog Box with Expanded Options
7 Check the ‘Display diagnostic screen during updates’ check box. The next time
Write All
is
clicked, the ‘Serial EE Write Status’ dialog box displays the status of data being written to the
control card.
8 Click
OK
to save changes and close the dialog box.
Or
Click
Cancel
to close the dialog box without saving changes.