Grass Valley UniConfi NVISION Series v.1.3 - Manual (Page 47)

UniConfig Configuration Application • User’s Guide 35
6. Setting Up Communication
Viewing Current Communication Settings
4 Click
Read All
. Current configuration settings for the selected control card populate the ‘Config-
uration’ window fields.
5 From the menu bar, select ‘Tools > Options’. The ‘Configuration Options’ dialog box appears:
Figure 6-12. Configuration Options Dialog Box
6 Check the ‘Show advanced Ethernet settings’ check box. By default this box is not checked.
7 Click
OK
to save changes and close the dialog box.
Or
Click
Cancel
to close the dialog box without saving changes.