Grass Valley UniConfi NVISION Series v.1.3 - Manual (Page 152)

140 Rev 1.3 • 14 Dec 09
15. Setting Gain and Inverting Polarity
Set Input Gain and Invert Polarity
How to Set Input Gain and Invert Polarity
1 Launch UniConfig. (See Launching UniConfig on page 9.)
2 From the menu bar, select ‘Window > Audio Adjustment’. The ‘Audio Adjustment’ window
appears:
Figure 15-1. Input Gain Values in UniConfig Audio Adjustment Window
3 Click the ‘Inputs’ tab.
4 Click
Read Inputs
.The tab displays current ‘Mono Input’, ‘Gain’ and ‘Polarity’ settings.
5 (Optional) To display each left or right channel of a stereo signal, check the ‘Display Mono as
Physical Connections’ check box:
Figure 15-2. Audio Adjustment Window with Mono Channels
The entries in the ‘Input’ and ‘Output’ fields refer to the monaural channel number associated
with the physical input and output, respectively. For example, channel 2 of physical input 17 is
mono channel 34.