Grass Valley UniConfi NVISION Series v.1.3 - Manual (Page 54)

42 Rev 1.3 • 14 Dec 09
7. Managing Control Cards on a Network
Adding a Control Card to a Network
If no control cards have been added, the pane is blank.
Figure 7-1. Configuration Window with Control Card Pane (Left Side)
5 Using the ‘Control Cards’ pane, add router control cards to the network:
a Right-click on ‘Control Cards’ and from the pop-up menu select ‘Add Control Card’. The
‘Control Card Configuration’ dialog box appears:
Figure 7-2. Control Card Configuration Dialog Box