Grass Valley UniConfi NVISION Series v.1.3 - Manual (Page 50)

38 Rev 1.3 • 14 Dec 09
6. Setting Up Communication
Selecting Bus for Serial Router Control System Connection
4 Select the ‘10bse2’ or ‘Internal’ radio button:
10Base2 — Informs UniConfig that the multiple routers are connected and internal control card
communication is through the 10Base2 connection.
Internal — Informs UniConfig that the router is in standalone mode and internal control card
communication is through an internal bus.
5 Click Write All to send changes to the control card.
6 Repeat steps 2–5 for each control card being updated.