Grass Valley UniConfi NVISION Series v.1.3 - Manual (Page 28)

16 Rev 1.3 • 14 Dec 09
4. Configuration Basics
Applying Only Current Changes or All Settings
Applying Only Current Changes or All Settings
When making changes to configurations, you can choose to have only the most recent changes or to
have all configurations settings, plus changes, written to the control card. Limiting changes that are
written is helpful when trying to isolate a specific change behavior. Data is written to the control
card when the
Write All
button is clicked on the ‘Configuration’ window.
How to Write Current or All Settings to the Control Card
1 Launch UniConfig. (See Launching UniConfig on page 9.)
2 Select a control card. (See Selecting a Control Card on page 10.)
3 From the menu bar, select ‘Windows > Configuration’. The ‘Configuration’ window appears,
as shown in Figure 4-1 on page 11.
4 Click Read All . Current configuration settings for the selected control card populate the ‘Config-
uration’ window fields.
5 From the menu bar, select ‘Tools > Options’. The ‘Configuration Options’ dialog box appears:
Figure 4-6. Configuration Options Dialog Box