Grass Valley UniConfi NVISION Series v.1.3 - Manual (Page 161)

UniConfig Configuration Application • User’s Guide 149
17. Working With Salvos
Viewing Salvos
4 Click
Browse
and browse to the location where you have previously saved the file.
5 Select the file and click
Open
. The saved information in the file displays in the ‘Salvo’ section
of the ‘Connections’ window.
6 Click
Execute
to send the changes to the control cards.
Viewing Salvos
Salvos do not automatically display. The ‘Salvo’ section must be activated for viewing on the ‘Con-
nections’ window to see salvo switching information.
How to View a Salvo
1 Launch UniConfig. (See Launching UniConfig on page 9.)
2 From the menu bar, select ‘Window > Connections’. The ‘Connections’ window appears dis-
playing current input and output settings, as shown in Figure 17-3. The ‘Connections’ window
must be open to activate the needed menu option.
3 Again, from the menu bar, select ‘Tools > Options. The ‘Connections Options’ dialog box
appears, as shown in Figure 17-2:
a Select the ‘Salvo’ tab.
b Check the ‘Show Salvo Window’ check box.
4 Click
OK
to save your changes and close the dialog box.
Saving a Salvo
Once a salvo is created, it can be saved in multiple locations, with multiple names or with its origi-
nal name to its original location.
How to Save a Salvo
1 Launch UniConfig. (See Launching UniConfig on page 9.)
2 From the menu bar, select ‘Window > Connections’. The ‘Connections’ window appears dis-
playing current input and output settings, as shown in Figure 17-3. The ‘Connections’ window
must be open to activate the needed menu option.
3 Create a new salvo or open an existing salvo. (See Creating a Salvo on page 145 and Opening
and Uploading a Salvo on page 148.)
4 Save the salvo with the existing name or create a new salvo name:
From the menu bar, select ‘File > Save Salvo As’. The ‘Save Opened Salvo’ window appears.
In the window, enter a ‘File Name’ and ‘Location’ in the fields provided (or browse to the file
location) and click
OK .
Or
From the menu bar, select ‘File > Save Opened Salvo’. The current salvo is saved to its original
location using the current file name.