Grass Valley UniConfi NVISION Series v.1.3 - Manual (Page 162)

150 Rev 1.3 • 14 Dec 09
17. Working With Salvos
Clearing a Salvo
Clearing a Salvo
An existing salvo can be cleared, enabling you to create a new salvo. A new salvo cannot be created
until the existing salvo has been cleared. This only affects the currently open salvo.
How to Clear a Salvo
1 Launch UniConfig. (See Launching UniConfig on page 9.)
2 From the menu bar, select ‘Window > Connections’. The ‘Connections’ window appears dis-
playing current input and output settings, as shown in Figure 17-3. The ‘Connections’ window
must be open to activate the needed menu option.
3 From the menu bar, select ‘Actions > Edit/Change Salvo > Clear Salvo’. The salvo information
is removed and the ‘Salvo’ section is blank.
Auto-send All Reads to a Salvo
Every time a the
Read All
button is clicked, the information can automatically be sent to a salvo.
How to Auto-Send All Reads to a Salvo
1 Launch UniConfig. (See Launching UniConfig on page 9.)
2 From the menu bar, select ‘Window > Connections’. The ‘Connections’ window appears dis-
playing current input and output settings, as shown in Figure 17-3. The ‘Connections’ window
must be open to activate the needed menu option.
3 Again from the menu bar, select ‘Tools > Options. The ‘Connections Options’ dialog box
appears, as shown in Figure 17-6.
a Select the ‘Salvo’ tab.
b Check the ‘Send all reads to Salvo Window’ check box.