Applied Motion RS-232 - Manual (Page 257)

257 920-0002 Rev. I
2/2013
Host Command Reference
Drive Disabled Hall Bad Stack Overflow
Position Limit Bad Encoder Stack Underflow
CCW Limit Memory Failed Q Program Running
CW Limit Excess Regen Drive enabled when
flashing
SV LED codes
Items in bold italic are Drive Faults.
DESCRIPTION
- solid Motor disabled
- flashing slowly Motor enabled
- flashing quickly Q program running (Q drives only)
1 1 position limit
1 2 move attempted while disabled
2 1 CCW limit
2 2 CW limit
3 1 over temp
3 2 internal voltage out of range
3 3 attempt to load blank Q segment
4 1 over voltage
4 2 under voltage
4 3 Bad Si program instruction
5 1 over current / short circuit
5 2 current limit
6 1 bad hall
6 2 bad encoder
7 1 serial communication error
7 2 bad flash
STAC6 LED codes
Items in bold italic are Drive Faults.
DESCRIPTION
- solid Motor disabled
- flashing slowly Motor enabled
- flashing quickly Q program running (Q drives only)