KEYENCE DV-90 - Manual (Page 95)

4-35
4
E DV-90-IM
Ba
si
c
Func
tions
4-7 2-Point Verification Function
5
Exit the setting mode.
Press the key twice.
Setting of the 2-point verification function is completed
Presetting the Master Data (Preset Mode)
Two preset master data items (Master data 1 and 2) are required to preset a record number.
1
Press the key.
The preset LED illuminates and the display moves
to the preset mode. The record number indictor
LED shows “001”. (EMPTY) is displayed on the
LCD, which indicates that Master data 1 (M1) is not
preset.
2
Read the first code (Master data 1) with the
code reader.
The buzzer sounds, and the read data is set as Mas-
ter data 1. The LCD displays the destination to
which Master data 2 (M2) is registered. The LED
still reads “001”.
3
Read the second code (Master data 2) with
the code reader.
The buzzer sounds, and the read data is set as Mas-
ter data 2.
The LED increments to “002” and the LCD displays
“M1:” for the new record. Continue steps 2 and 3
until all presets have been entered.
ESC
OK NG
PRESET
12 11 10 9
8 7 6 5
4
TRG1 TRG2
3 2 1
ERR
( E M P T Y )
M 1 :
PRESET
( E M P T Y )
M 2 :
( E M P T Y )
M 1 :