KEYENCE DV-90 - Manual (Page 34)

2-10
2
Initial Setup
of the Cod
e
Reade
r
E DV-90-IM
5
To exit the reading rate test mode, press the
key on the DV-90, select “QUIT” with the
or key, and then press the key.
6
Press the key to exit the test mode.
The read test is completed.
Checking the Type of the Read Barcode
The screen displays the type, the number of digits,
and the content of the read code.
3
Press the key to exit the test mode.
The code check in the test mode is completed.
1
Pressing the key on the DV-90 twice dis-
plays “Test Mode 2 Code Check” for a sec-
ond, and the screen to the right is displayed.
2
Press the key. Press the “TEST” button
on the BL Series or the SR Series as a code
passes underneath the reader.
Q U I T
> 1 2 3 4 5 6 7 8 9 0 : 6 0 %
FNC
ESC
C o d e C h e c k
>
TEST
Code type
Number of digits
J A N : 1 3
> 1 2 3 4 5 6 7 8 9 0 A B C
TRG
ESC
2-3 Read Test Procedure of the BL Series and the SR Series