KEYENCE DV-90 - Manual (Page 156)

7-18 E DV-90-IM
7
How to Use the Setup
So
ftw
a
re
7-3 Setting Procedure
6
Under “Verify Limit” select “Logic”.
When “Limit” is selected for “Type” of “Verify Limit”, “Logic” is fixed to “=”.
When the record field is displayed in red
About the Right-Click Menu
The master data can be edited using the menu displayed by right-clicking the mouse.
Note
When the “Verify Limit” or “Date Compare” setting contains an error, the corresponding
record field is displayed in red.
Correct the setting in such a case. The record field is displayed in red in the following
cases:
• When “Verify Limit” or “Date Compare” is set without any master data entered
• When the master data is not between –10000 and +10000 (6 digits fixed) in the “Date
Compare” setting
• When data is entered in Master data 2 and 3, but Master data 1 is left empty (Enter the
master data in increasing order of master data number.)
Reference
When two master data items are set for Date Compare in one record number, the data
range (upper and lower limits) can be specified. (
Refer to 7-19)
Note
To apply the contents of the master data, the settings should be sent to the DV-90. ( Refer
to 7-21)
Undoes the edit and returns to the previous state.
Cuts the character string.
Copies the character string.
Pastes the cut/copied character string.
Selects all the master data.
Initializes the selected data.
Sets the upper limit and lower limit of Date Compare.
Shows/hides the content of “Verify Limit”.