KEYENCE DV-90 - Manual (Page 89)

4-29
4
E DV-90-IM
Ba
si
c
Func
tions
4-6 3-Point-B Verification Function
3
Specify the verification type.
Display “Verify Type” by pressing the or
key. Then, press the key.
4
Specify the 3-point-A verification func-
tion.
Press the or key to place the cursor on
“3Points-B”. Then, press the key.
5
Exit the setting mode.
Press the key twice.
The 3-point-B verification function has been completed.
Presetting the Master Data (Preset Mode)
Refer to “Presetting the Master Data” of the 3-point-A verification function for presetting the mas-
ter data. ( Refer to 4-22)
Working with the 3-Point-B Verification Function (Verification Mode)
The flow of 3-point-B verification is as follows.
The screens and the illustrations are examples for verification with the master data in Record num-
ber 1.
1
The screen is displayed to the right.
OUT9 to 12 of the parallel output LEDs illu-
minate to indicate that they are in the waiting
state for the First reading. At this time, OUT9
to 12 of the parallel output are turned ON.
0 : N o r m a l
V e r i f y T y p e 0 1
4 : 3 P o i n t s - B
V e r i f y T y p e 0 1
ESC
( R e a d y t o R e a d )
OK NG
12 11 10 9
8 7 6 5
4 3 2 1
ERR