6 3-point-b verification function, Point-b verification function, Setting the 3-point-b verification function – KEYENCE DV-90 User Manual
Page 88: Point-b verification function -28
4-28
E DV-90-IM
4
Ba
si
c
Func
tions
4-6
3-Point-B Verification Function
This function is used to compare and verify the master data in the order that the data is read, and the data is
counted as one group.
Verify OK is output each time the data is read.
3-Point-B Verification Function
The 3-point-B function verifies three registered master data items and three read data items. Regis-
ter the data “123”, “456”, and “789” first. When the read data is “123”, “456”, and “789” as well,
OK is output each time the data is read.
When the read data does not match the registered data, NG is output at the time the unmatched data
is read.
In 3-point-B verification, three data items of Master data 1 to 3 can be registered with one record
number. Each time the data is read, the verification is performed with Master data 1 to 3 in that
order. Then, the OK/NG result is output.
The operation flow for working with the 3-point-B verification function is as follows.
1 Setting the 3-point-B verification function
2 Presetting the master data
3 Working with the 3-point-B verification function
Setting the 3-Point-B Verification Function
1
Move to the setting mode.
Press the
key for one second. The display
enters the setting mode.
2
Displaying the basic settings menu.
Place the cursor on “Main” by pressing the
or
key. Then, press the
key.
1 2 3
1 2 3
4 5 6
4 5 6
7 8 9
7 8 9
Master data
Master
data 1
Master
data 2
Master
data 3
Verify
OK
First data reading
Second data reading
Third data reading
Verify
Verify
OK
OK
M a i n
2
V e r i f y
MENU
0 1
V e r i f y T y p e
0 : N o r m a l