KEYENCE DV-90 - Manual (Page 56)

3-22
3
C
on
necti
ons
and
M
ounti
ng
E DV-90-IM
3-3 USB Interface Connection/Driver Installation
13
When the installation is complete, the notification “Your new hardware is
installed and ready to use.” is displayed at the lower right of the screen.
14
Check whether the driver is correctly installed on the “Device Manager”
screen.
If “KEYENCE DV-90 USB (COM*)” is added in “Port (COM and LPT)”, it indicates that the
driver has successfully been installed.
At this time, check the port No. as well.
If this item is not added, or “!” or “
×” is shown, uninstall the driver (
refer to 3-23), and
reinstall it.
The driver software has been successfully installed.
Reference
To display the “Device Manager” screen, select “My Computer”
→“Property”→ “Hardware”
→ “Device Manager”.