Operation settings, Operation settings -8 – KEYENCE DV-90 User Manual

Page 146

7-8

E DV-90-IM

How to Use the Setup

So
ftw
a

Operation Settings

In the operation settings, the verification setting, PORT1/PORT2 setting, I/O setting, and options
setting of the DV-90 are set. The setting screen switches when the respective tabs are clicked.

Verify Settings

Out Format

Output Data Type

Detail

Reference Data

Interlock

Verify Counter

Master record count

Preset Auto Increment

• Out Format

Sets the format of the parallel output
from the I/O terminal. (

Refer to 6-6)

OFF
Bit
Binary
BCD

• Output Data Type

Sets the type of output data.
(

Refer to 6-6)

OFF
Input Data
Input Limit
Verify Limit

• Detail

Sets the detailed settings of the serial
output. (

Refer to 7-9)

• Reference Data

Enable/Disable the reference data.
(

Refer to 5-2)

• Interlock

Sets the interlock.
(

Refer to 4-11)

OFF
at Verify OK
at Verify NG
Read Error

• Verify Counter

Enable/Disable the Verify Counter.
(

Refer to 4-9)

• Master record count

Sets the number of records to be used
in the master table. (

Refer to 6-7)

• Preset Auto Increment

Sets ON/OFF of Auto Increment when
presetting the master data.