KEYENCE DV-90 User Manual
Page 147
7-9
7
E DV-90-IM
How to Use the Setup
So
ftw
a
re
(Serial Output (Detail))
*ASCII input and hexadecimal input
The input type can be selected from either “ASCII” or “Hex” for a character string with separators,
a header, and a terminator. When “Hex” is selected, input hexadecimal values (00 to FF).
Separator *
Additional Data
USB Data Output
Send Data Format
Header *
Terminator *
Output Delay Time
Additional Verify
Information
Protocol
• Separator *
Sets the data delimiter (separator).
(
Refer to 8-5)
• Additional Data
Sets the additional information of the out-
put data.(
Refer to 8-8)
• Additional Verify Information
Sets the additional record number and
output number.
• USB Data Output
Sets ON/OFF of data output from the
USB port.
• Send Data Format
Sets the send format of the serial output
data. (
Refer to 8-5)
STX...ETX
none…CR
none…CRLF
ESC…CR
ESC…CRLF
Manual
• Header *
Sets the header of the send data when
the send data format is set to “Manual”.
(
Refer to 8-5)
• Terminator *
Sets the terminator of the send data
when the send data format is set to
“Manual”. (
Refer to 8-5)
• Output Delay Time
Sets the output delay time of the serial
output.
• Protocol
Sets the communication protocol of the
serial output. (
Refer to 8-4)