KEYENCE DV-90 - Manual (Page 233)

9-33
9
E DV-90-IM
PLC Link
9-5 Settings
„ CJ Series, CS1 Series (CPU internal port)
CS1W-SCB21/41 (communication board),
CS1W-SCU21 (communication unit)
(DIP switch)
(PC system setting)
m = D30000 + 100 x unit number
* In the initial setting, the baud rate is set to 9600 bits/s, data length to 7, parity to even, and stop bit
length to 2. When you want to change the settings, set the bit to “1”, and configure the desired
settings in the above locations.
SW number Setting value Setting content
5 OFF Cancels the fixed settings of the communication port/communication condition
CPU internal
RS-232C port
Communication
board
Communication unit Bit Setting item DM value
160 channels PORT1: DM32000
PORT2: DM32010 PORT1: m
PORT2: m+10
00 to 01
Parity
00: Even
0000
2
Stop bit
0: 2 bits
3
Data length
0: 7 bits
8 to 11
Communication mode
00: Upper link
15
Desired setting
0: Default value *
161
channels PORT1: DM32001
PORT2: DM32011 PORT1: m
PORT2: m+10
00 to 07
Communication speed
06: 9600 bits/s
0006