KEYENCE DV-90 - Manual (Page 58)

3-24
3
C
on
necti
ons
and
M
ounti
ng
E DV-90-IM
3-4
Wiring the Power Supply Terminals
Connect the DV-90 to a 24V DC power supply with a minimum output rating of 850 mA.
(Tightening torque: 0.5 Nm)
Use the power supply with the output rated voltage of 24V DC and the output current of
850 mA or more.
Failure to use the power supply that satisfies this specification may result in damage to
the DV-90.
„ Crimp-type terminal to use
The power terminal block of the DV-
90 uses M3.0 screws.
Connect the crimp-type terminals
as shown on the right.
Power supply unit
Shapes of the crimp-type terminals
Fork type
Ring type
6.0 mm or less
6.0 mm or less
CAUTION