KEYENCE DV-90 - Manual (Page 144)

7-6 E DV-90-IM
7
How to Use the Setup
So
ftw
a
re
Menu Commands
This section describes the menu commands of the SetUp Software.
„ File menu
„ Edit menu
„ Communication menu
„ Tool menu
„ Help menu
Creates a new setting file. ( Refer to 7-26)
Opens the saved setting file. ( Refer to 7-26)
Saves the changed setting file by overwriting the
existing file. (
Refer to 7-25)
Saves the changed setting file as a different setting
file. (
Refer to 7-25)
Prints the setting contents. ( Refer to 7-27)
Prints the Quick Setup Codes of the DV-90.
(
Refer to 7-28)
Exits the SetUp Software. ( Refer to 7-5)
Used for editing the master table. ( Refer to 7-15)
Sets the communication condition of the PC. ( Refer
to 7-21)
Sends commands and receives data to/from the DV-90.
( Refer to 7-35)
Sends settings to the DV-90. ( Refer to 7-21)
Reads settings from the DV-90. ( Refer to 7-23)
Prints the Quick Setup Codes of the code reader.
( Refer to 7-31)
The supported code readers are BL-700/600/500/180.
Displays the version information of the SetUp Software.
7-2 Overview of Operation Method