KEYENCE DV-90 - Manual (Page 245)

Appendix-9 E DV-90-IM
App
endix
6
Factory Setting List
This section describes the factory settings of the DV-90.
„ Basic settings
„ Verify
„ PORT1
Verify Type Normal
PORT1 Unit Code reader
Code Reader 1 (type) Type A
PORT2 Unit PC
Code Reader 2 (type) Type A
PLC Type KEYENCE KV
Parallel Out Bit
Output Data Input Limit
Add. Info. OFF
Reference Data OFF
Interlock OFF
Counter OFF
Master Limit Number 012
USB Data Out OFF
Serial Send Format [DATA] +CR
Serial Output Delay 0 ms
Serial Comm. Protocol No Handshaking
Preset Incr. ON
Additional Verify Information ON
Baud Rate 9600 bits/s
COM1 Format Data length: 7 bits Parity check: Even Stop bit length: 1 bit
Input Limit OFF
Receive Format [DATA] +CR
Trigger Mode Hardware
Quality Check OFF
Quality Level 50%
Read Error Check OFF