KEYENCE DV-90 - Manual (Page 238)

Appendix-2 E DV-90-IM
App
endix
1
Specifications
This section describes the specifications of the DV-90.
Model DV-90NE (NPN output type)
DV-90PE (PNP output type)
Name AutoID Data Controller
Acceptable code reader
BL-1300/700/600/180 Series, HR-50RK/40RK/UC51,
BL-210RK/N70RKE/N9R, TL-800/70R, SR-600/500 Series
Registered preset data number 900 at maximum
Memory backup Flash ROM (Rewritable: 100,000 times)
Input (4 points)
• Trigger input 2 points
• Unlock input
• Remote input
Rated input voltage DC 10 V to 26 V, 10 mA, class 2
Maximum OFF current 1.0 mA
Output (16 points)
• OUT1 through 12
• OK output
• NG output
• Read error output
• Read quality judgment output
Output form DV-90NE : NPN open collector
DV-90PE : PNP open collector
Rated load DC 30 V 100 mA
Leakage current during OFF 0.1 mA or less
Residual voltage during ON Less than 1 V
PORT1
(For connection of code reader)
PORT2 (for connection of PC,
PLC, and code reader)
Conforming standards Conforming to RS-232C standards
Synchronization method Asynchronous
Transmission speed 600/1200/2400/4800/9600/19200/
31250/38400/57600/115200 bit/s
Data length 7, 8 bits
Parity check None/Even/Odd
Stop bit length 1, 2 bits
USB (for connection of PC) USB 2.0 (B type) (Communication speed fixed to 115200 bits/s)
Power for code reader DC 5 V ± 5% Maximum 1,100 mA (at the ambient temperature of
0 to 40
°C)
Maximum 850 mA (at the ambient temperature of 40
to 50
°C)
Power for sensor DC 24 V ± 10% Maximum 250 mA
Enclosure rating IP-65 (At panel installation, front panel only)
Operating surrounding air temperature 0 to + 50
°C
Operating ambient humidity 35 to 85% RH (No condensation)
Ambient location No dust, no corrosive gas
Power voltage DC 24 V ± 10% class 2
Current consumption 850 mA or less
Weight About 360 g
I/
O t
e
rm
inal
Serial inter
face
P
o
wer output
En
vi
ro
nmen
tal
resist
ance
Rating