KEYENCE DV-90 - Manual (Page 177)

7-39 E DV-90-IM
7
How to Use the Setup
So
ftw
a
re
7-9
Error Display List
This section describes the messages displayed on the SetUp Software when an error occurs.
„ Error display on the SetUp Software
Status Error indication Error contents
During setting
Input is inaccurate.
[OK]
The input data contains an error. Input the
correct data.
While sending/receiv-
ing data
Please check Update Parameter.
[OK]
The send/receive item is not selected. Select
either “DV-90 Setting” or “Master Data”.
Communication Error
[OK]
Communication error has occurred check
cabling.
Port does not open.
[OK]
The communication port is in use or does not
exist.
While printing Quick
Setup Codes
Printing failure
[OK]
Printing has failed.
Over Code Limit
[OK]
The setting contents cannot be fully reflected
in the Quick Setup Code.
Nothing
[OK]
This error occurs when the settings have not
been changed from the default values.
While handling a file
File name is inaccurate.
[OK]
The file name is not correct. Input the correct
name.