KEYENCE DV-90 - Manual (Page 155)

7-17
7
E DV-90-IM
How to Use the Setup
So
ftw
a
re
7-3 Setting Procedure
„ Setting Verify Limit/Date Compare
To configure the settings of Verify Limit/Date Compare , refer to pages 5-9 and 5-10.
The setting procedure using the SetUp Software is described below.
1
Input the data.
For Date Compare, enter the data in the range between –10000 and +10000 (six digits including
+ or –).
+10 days
→ +00010
+100 days
→ +00100
2
Under “Verify Limit” select “Type”.
3
Under “Verify Limit” select “Direction”.
4
Under “Verify Limit” enter “Limit Start” (1 to 500).
5
Under “Verify Limit” enter “Limit Digits” (1 to 500).
When “Date Compare” is selected for “Type” of “Verify Limit”, “Limit Digits” is fixed to “6”.
Example