KEYENCE DV-90 - Manual (Page 110)

5-12 E DV-90-IM
5
Ex
tend
ed Fun
c
tions
5-4 Verify Limitation Function
„ Checking the commodity code and expiration date of an GS1-128 code using a differ-
ent format
When multiple formats are used in the GS1-128 code, the master data used to check the commodity
code and the expiration date is as follows.
The expiration date can be checked when the upper and lower limit values of the expiration date are
set in Master data 2 and 3.
Note
• Input the symbol “ ^ ” to preset the GS with the SetUp Software. Send the GS , when pre-
setting the data by the serial communication command.
• The GS is displayed as “ ” in the display of the DV-90.
• It is not possible to input the GS when editing the master data by key operation in the pre-
set mode.
01 14512345678903 17 041215 30 1000 GS 10 1234
Commodity code Expiration date Quantity Lot number
01 54512345678901 30 1000 GS 10 1234 GS 041215
Commodity code Quantity Lot number Expiration date
* GS is the character used to represent the data delimitation (1Dh), which is counted as one digit.
Record
Number
Output
Number
Master data 1 Master data 2 Master data 3
1 1
1451234
5678903
+00030 +00060
Digit
Limit Direction : Forward
Limit Start : 3
Limit Digits : 14
Date Compare
Limit Direction : Forward
Limit Start : 19
(Limit Digits : 6)
Compare Logic :
≥
Date Compare
Limit Direction : Forward
Limit Start : 19
(Limit Digits : 6)
Compare Logic :
≤
2 2
5451234
5678901
+00030 +00030
Digit
Limit Direction : Forward
Limit Start : 3
Limit Digits : 14
Date Compare
Limit Direction : Forward
Limit Start : 19
(Limit Digits : 6)
Compare Logic :
≥
Date Compare
Limit Direction : Forward
Limit Start : 19
(Limit Digits : 6)
Compare Logic :
≤
...
..
..
...
..
..
..
..
...
..
..
...
..
..
...
.
Lower limit value Upper limit value