KEYENCE DV-90 User Manual
Page 33
2-9
2
Initial Setup
of the Cod
e
Reade
r
E DV-90-IM
2
Press the
key on the DV-90 and the com-
mand to be sent to the BL Series or the SR
Series is displayed.
Press the
or
key to select either one of the fol-
lowing items.
Refer to the user’s manual of the BL Series and the SR Series for the details of these functions.
3
When using the reading rate test mode,
select “TEST1” with the
or
key.
4
Press the
key on the DV-90.
The code is read, and then the data and reading rate
are displayed.
The reading rate is displayed on the Record No. indi-
cator LEDs.
BL-700/600/180
BL-1300
SR-600/500
TEST1
Starts the reading rate test
mode.
Starts the reading rate test
mode.
Starts the reading rate test
mode. (Offline)
TEST2
Starts the tact measurement
test mode.
Starts the tact measurement
test mode.
Starts the tact measurement
test mode. (Offline)
TEST3
–
Starts the code position
measurement test mode.
Starts the code position
measurement test mode.
(Offline)
QUIT
Quits the test mode.
Quits the test mode.
Quits the test mode. (Offline)
#TEST1
Starts the online test mode
(BL700/600 only).
Starts the online test mode.
Starts the reading rate test
mode. (Online)
#TEST2 –
–
Starts the tact measurement
test mode. (Online)
#TEST3 –
–
Starts the tact measurement
test mode. (Online)
#QUIT
Quits the online test mode
(BL700/600 only).
Quits the online test mode.
Quits the test mode (Online)
LON
Starts reading.
Starts reading.
Starts reading.
LOFF
Quits reading.
Quits reading.
Quits reading.
T E S T 1
* C R 1 < >
FNC
T E S T 1
* C R 1 < >
T E S T 1
> 1 2 3 4 5 6 7 8 9 0 : 6 0 %