3 active verification – KEYENCE DV-90 User Manual
Page 76
4-16
E DV-90-IM
4
Ba
si
c
Func
tions
3
Set the active record.
Set the active record by pressing the
key.
The selected active record number is displayed on the record number indicator LEDs.
Setting the active record is completed.
Working with the Active Verification Function (Verification Mode)
Working with the output of active verification is shown above. Other operations are the same as
with the normal verification function. (
Refer to 4-8)
Confirmation of the master data, the counter function, the timing chart, and the interlock function
for parallel output use the same procedure as with normal verification. (
Refer to 4-9 to 4-12)
• When the read data matches the selected active data, according to the displayed active record
number, OUT1 to 12 is turned ON.
• When the read data does not match the selected active record, outputs representing “999” (NG
and Verify NG) are turned ON.
• When the read error check is set, if a reading error occurs, outputs representing “997” (Read
Error) are turned ON.
DV-90
OK
NG
TEST
TRG
EDIT
FNC
MENU
PRESET
DEL
ESC
12
11
10
9
8
7
6
5
4
TRG1
TRG2
3
2
1
ERR
( R e a d y t o R e a d )
Active record
number