KEYENCE DV-90 - Manual (Page 72)

4-12 E DV-90-IM
4
Ba
si
c
Func
tions
2
Display the verification settings menu
Press the or key to place the cursor on
“2 Verify”.
Then, press the
key.
3
Display the interlock settings.
Press the or key to display the interlock
settings, then press the key.
4
Specify the interlock function.
The displays are switched by pressing the or key.
• “OFF”
...The interlock function is not activated.
• “at Verify OK”
...Interlock is performed when Verify OK occurs.
• “at Verify NG”
...Interlock is performed when Verify NG occurs.
• “at Read Error”
...Interlock is performed when a read error occurs.
Press the key to specify the function.
5
Exit the setting mode.
Press the key twice.
„ Display of interlock state and cancellation
The sign shown below is displayed in the interlock
state.
The interlock state is cancelled by turning ON the
UNLOCK input or by pressing the key. The dis-
play will be as shown below.
1 : B i t
P a r a l l e l O u t 0 1
0 : O F F
I n t e r l o c k 0 5
ESC
1 2 3 4 5 6 7 8 9 0
Flashing
( R e a d y t o R e a d )
4-2 Normal Verification