KEYENCE DV-90 - Manual (Page 128)

6-4 E DV-90-IM
6
Setti
ng
6-2
Setting Items of the DV-90
This section describes the items to be set in each setting menu of the DV-90. For details on the setting content, see
the corresponding section for each item.
Menu List
Main menu
1 Main ............................ Main setting menu ( refer to the
description below)
2 Verify .......................... Verification setting menu ( refer to
page 6-6)
3 PORT1........................... PORT1 setting menu ( refer to page 6-8)
4 PORT2 .......................... PORT2 setting menu ( refer to page 6-8)
5 I/O ............................... /O setting menu ( refer to page 6-11)
6 Options ......................... Option setting menu ( refer to page 6-12)
7 Code Setting .............. Setting menu when using Quick Setup
Codes ( refer to 6-13)
0 Initializing settings ( refer to 6-13)
Main Setting Menu
„ Menu list
Main setting menu
Verification type
PORT1 connecting unit
Code reader 1 type
1
PORT2 connecting unit
Code reader 2 type
2
PLC type
3
1 Setting is possible only when “PORT1 Unit” is set to “Code Reader”.
2 Setting is possible only when “PORT2 Unit” is set to “Code Reader”.
3 Setting is possible only when “PORT2 Unit” is set to “PLC Link”