Type of output data – KEYENCE DV-90 User Manual
Page 184
8-6
E DV-90-IM
8
Ser
ia
l Comm
unicati
on
8-2 Data Communication Details
Type of Output Data
Select the output data from the types shown below.
Difference in Send Data Contents Due to Verification Pattern
The contents of the output data are as shown below, depending on the contents.
(“Header” and “Terminator” are eliminated.)
Normal verification/Active verification
When “Output Data” is set to “Verify Limit”, the data is output as shown below.
(In a case where Master data 1 and 2 are used, and the “Output Data” is set to “Verify Limit”.)
(In a case where Master data 1,2,3 are used, and the “Output Data” is set to “Verify Limit”.)
Off
The data is not output.
Input Data
Outputs the data read by the code reader read as it is.
Input Limit
Outputs the data after the number of inputting digits is limited. (
Refer to page 5-4)
Verify Limit
Outputs the data after the number of verifying digits is limited. (
Refer to page 5-9)
Verify OK
Verify NG
Read Error
001 through 900
:
001 through 900
:
Output data
999
:
999
:
Output data
997
:
997
:
Output data
Verify NG
Read Error
Verify OK
001 through 900 : 001 through 900 : Verify Limit 1 : Verify Limit 2
...... Active verification
................................. Normal verification
Verify NG
Read Error
Verify OK
999
:
999
:
Input Limit
999
:
999
: Verify Limit 1 : Verify Limit 2
997
:
997
:
ERROR
001 through 900 : 001 through 900 : Verify Limit 1 : Verify Limit 2 : Verify Limit 3
999
:
999
: Verify Limit 1 : Verify Limit 2 : Verify Limit 3
999
:
999
:
Input Limit
997
:
997
:
ERROR
..................................Normal verification
.......Active verification