Metrohm IC Net 2.3 - Manual (Page 85)

6.4 819 IC Detector
IC Net 2.3 75
6.4 819 IC Detector
6.4.1 819 IC Detector features
The Metrohm 819 IC Detector is a conductivity detector for ion
chromatography. The associated thermostatable detector block
can be used for recording of chromatograms with and without
chemical suppression and is normally installed in the 820 IC
Separation Center. The two following versions are available:
• 2.819.0010 IC Detector with standard detector block
• 2.819.0110 IC Detector with metal-free detector block
The 819 IC Detector is completely remote controlled and can be
operated using the «IC Net» program. The 819 IC Detector is
normally connected to the 830 IC Interface using the 6.2134.130
cable. Examples for interconnections with the 819 IC Detector can
be found in the 830 Instructions for Use.
For detailed information about the 819 IC Detector see 819/820
Instructions for Use.
6.4.2 819 IC Detector icon
The 819 icon is available in the SYSTEM window if a 819 IC Detector
has been installed with the New system wizard or by using the
Setup/New devices/Install new device option of the SYSTEM window
(see section 6.1.2).
If the system is connected and the
819 icon is clicked with the
right mouse button, the following menu appears:
Open Open the 819 IC Detector window for parameter settings
(this window can also be opened by double-clicking
the icon).
Unlink Delete the 819 icon from the system.
6.4.3 819 IC Detector window
819 icon / Open
The
819 IC Detector
window for parameter settings is opened by
selecting this menu option with the right mouse button or by dou-
ble-clicking the
819 icon in the SYSTEM window. It consists of the
four tabs Display , Method parameter , Program , and Links .