Metrohm IC Net 2.3 - Manual (Page 142)

6 Devices
IC Net 2.3 132
First column Time at which program instruction is ap-
plied.
Entry range:
0.0 ... 999.9 min
If no time is entered, the program instruc-
tion is applied together with the last instruc-
tion with time entry.
Second column Program instruction (see below).
Third column Parameter for program instruction (see be-
low).
ENABLED Enable program start (a disabled program
is not started).
Add new program instruction.
Delete selected program instruction.
Test the time program (error messages are
displayed if program is wrong).
List of program instructions
The following program instructions can be added to the time pro-
gram on the
Program page:
Instruction Parameter entry Meaning
Pump on, off Switch the high pressure pump
on or off.
Flow 0.01 ... 5 mL/min Set flow rate of the high pressure
pump to the desired value.