Metrohm IC Net 2.3 - Manual (Page 274)

6 Devices
IC Net 2.3 264
Opens the dialog for entering the path and file name.
Saves the last recorded spectrum in the selected
.cvs-file. Format: 2 lines of floating numbers (first line:
wavelength, second line: absorption or intensity).
Copies plot into clipboard.
Closes window.
If a right-hand mouse click is made in the spectrum window the wavelength
Current wavelength and the corresponding absorption value Current spec.
value will be shown.
6.29 Data recorder
6.29.1 Data recorder icon
The Data recorder icon is one of the components always pre-
sent in a new
SYSTEM
window. If the system is connected and
this icon is clicked with the right mouse button, the following
menu appears:
Open Load the processing method linked to the sys-
tem and open an empty chromatogram window
(this window can also be opened by double-
clicking the icon).
Setup Open data recorder setup window for selection
of processing method and data source (see be-
low).
Upload buffer Upload of last chromatogram which was ac-
quired with the 762 IC Interface (
Upload buffer
doesn't work for all other interfaces). The chroma-
togram is immediately drawn on screen and
saved under a new name.
Unlink Delete the Data recorder icon from the system.
To record several single-channel chromatograms at the same
time, data recorder icons must be installed for each detector. To
record multi-channel chromatograms, only one data recorder
icon must be installed, but several data source channels have to
be linked to this data recorder.