Metrohm IC Net 2.3 - Manual (Page 352)

8 Chromatograms
IC Net 2.3 342
The names of the components for which data is to be exported
to the Excel file have to be
exactly the same (case sensitive!)
in the component table of the «IC Net» method and here.
[Charts]
NoCharts = n , number of charts that created from the data
worksheet.
X1 =
Y1 = n , pair of axes of the chart 1 – n ., the number after
= specifies the header number of the 1 st – n th col-
umn of the data worksheet and therefore defines
which data is assigned to each axis.
Xn =
Yn =
The header of the column assigned to the y-axis is the chart name
in the Excel file, this header is also displayed as title in the chart.
Scaling of the y-axis is done automatically depending on the val-
ues of the data points.
Every chart has to have a unique chart name, therefore no
charts with the same y-axis are possible.
[Files]
ReportFile = Specifies the path and name of the «IC Net» re-
port file, where the data for the Excel report is ex-
tracted from.
ExcelFile = Specifies path and name of the Excel file used
for the Excel report.
Worksheet = Specifies the worksheet of the Excel file specified
above, where the data extracted from the «IC
Net» report is written to, this worksheet must ex-
ist in the Excel file specified above.
It is not recommended to alter one of the settings above.
Minimize = True Excel is minimized every time data is
added to the Excel report
False Excel stays on top after data is added
to the Excel report.
.
.
.
.
.