Metrohm IC Net 2.3 - Manual (Page 198)

6 Devices
IC Net 2.3 188
Stop moving the rack to place the specified
vessel at the needle.
Position Selection of the vessel to be placed at the
needle.
Selection:
sample, sample+1, spec.#, 1...n
Lift
Start raising or lowering the lift to the speci-
fied position.
Stop raising or lowering the lift to the speci-
fied position.
Position Selection of the position.
Selection:
shift, work, rinse, special, 0, 1...125
mm
Pump
Switch on peristaltic pump at the tower for
the specified time.
Switch off peristaltic pump at the tower.
Time Selection of the pump time.
Selection:
on (infinite), 1...999 s
Control
Send specified signal via remote control
lines of the 788 IC Filtration Sample Proc-
essor.
Control lines Selection of special remote line commands
or individual control line settings (details
see 788 Instructions for Use).
Program
Start program of the Program tab.
Stop program of the Program tab.
Sample
Sample number for manual program start.
Number Selection of the rack position.
Selection:
1...n
For detailed information about the 788 IC Filtration Sample Proc-
essor see 788 Instructions for Use.