Metrohm IC Net 2.3 - Manual (Page 47)

4.5 System state window
IC Net 2.3 37
4.4.7 Show system parameters
SYSTEM / Setup / Parameters / Startup hardware
Display of the name of the method linked to the system, the main
measurement channel, the configuration settings for the devices,
and the system startup values.
SYSTEM / Setup / Parameters / Start with determination
Display of the objects defined in the Start mode window. The time
programs are displayed if the programs are enabled.
SYSTEM / Setup / Parameters / Start with inject
Display of the objects defined in the Start mode window. The time
programs are displayed if the programs are enabled.
4.4.8 Links
SYSTEM / Setup / Links
Display of all devices of the system (including watch window and
data recorder).
4.5 System state window
The SYSTEM STATE window is automatically opened if a system is
connected. It shows status and error messages for this system.
Messages concerning a device are followed by
["device name"] ,
messages concerning the loaded system are followed by
["folder
name"] (name of the folder who contains the system file). The fol-
lowing messages can appear:
4.5.1 Status messages
Checking on-line Checking connection between PC and de-
vice.
On-line Connection between PC and device ok.
UploadStartupValues Hardware or system startup values have
been loaded to the device.
Initialisation Hardware or system initialization.
Ready Device is ready.
Starting Starting program or chromatogram data
acquisition.