Metrohm IC Net 2.3 - Manual (Page 230)

6 Devices
IC Net 2.3 220
6.26 838 Advanced Sample Processor
6.26.1 838 Advanced Sample Processor features
The Metrohm 838 Advanced Sample Processor is an auto-
sampler for automatic sample injection in ion chromatography.
Up to three dosinos can be connected to it via MSB-Connection.
Besides the standard functions of an IC Sample Processor, it can
handle automatic dilution/enrichment, inline calibration, partial
loop injections and injection of very small sample volumina. It has
a capacity of up to 148 samples each with an effective volume of
up to 11 mL.
The 838 Advanced Sample Processor can be fully operated using
the «IC Net» program. The 838 Advanced Sample Processor is
normally connected with the 6.2134.100 cable either to the 830 IC
Interface or directly to the PC. To control the 732 IC Detector or
819 IC Detector via the 838 Advanced Sample Processor connect
them with the 6.2141.190 cable to it.
For detailed information about the 838 Advanced Sample Proc-
essor see 838 Instructions for Use.
6.26.2 838 Advanced Sample Processor icon
The 838 icon is available in the SYSTEM window if a 838 Advanced
Sample Processor has been installed with the New system wizard or
by using the Setup/New devices/Install new device option of the
SYSTEM window (see section 6.1.2).
If the system is connected and the 838 icon is clicked with the
right mouse button, the following menu appears:
Open Open the 838 Advanced Sample Processor window
for parameter settings (this window can also be
opened by double-clicking the icon).
Autoinit Open the 838 Autoinit window.
Show report Open the report.