Metrohm IC Net 2.3 - Manual (Page 238)

6 Devices
IC Net 2.3 228
lution (D) in the sample queue:
Concentr. vol. = MV/D
Dilution vol. Dose Dilution vol. (DV) = MV *
(D-1)/D
Reagent vol. Dose
Reagent volume
(
R
) defined
on the tab Configuration/General.
-Reagent vol. Aspirate
Reagent volume
(
R
) defined
on the tab Configuration / General .
fill Fills the dosino cylinder.
release Prepares the dosino for changing
the dosing unit. The dosing cylin-
der is filled via the rinse port. The
stopcock is turned to the exchange
position (Port 2).
prepar. Preparation cycle (PREP) for dosi-
nos. All tubing is rinsed and filled
completely.
empty Tubing system and dosino cylinder
are emptied.
endVol Dosino cylinder contents are
ejected.
compen. Cancels the mechanical play be-
tween the dosing piston and spin-
dle.
port 1..4 Define new dosing port (Configura-
tion value Dos port is temporarily
overwritten).
Dosino
MSB1..3
rate 0.01…160 mL/min Define new dosing rate for the cur-
rently used dosing port of the cor-
responding dosino (Configuration
value Rate is temporarily overwrit-
ten).
Tower Stir-
rer, Stirrer
MSB1..3 on (infinite) , off,
1...9999 s
Choose stirrer and select running
duration.
Membrane
Pump 1..2 on (infinite) , off,
1...999 s
Choose pump and select running
duration.