Metrohm IC Net 2.3 - Manual (Page 60)

5 Interfaces
IC Net 2.3 50
5.3.2 830 icon on the toolbar
The 830 icon is available on the toolbar if a 830 IC Interface has
been installed with the new system wizard or by using the
device> option of the WORKPLACE window (see section 5.1.2). By
clicking this icon the 830 IC Interface window for parameter set-
tings opens.
5.3.3 830 icons in the system window
The 830 System 1 and 830 System 2 icons are available in the SYS-
TEM window if the 830 System [1] or 830 System [2] have been in-
stalled with the Install existing devices option (see section 6.1.3).
By clicking this icon using the right mouse button, the following
menu items can be selected:
Open Open the 830 System [#] window for programming the
event output lines (this window can also be opened by
double-clicking the icon).
Unlink Delete the 830 icon from the system.
5.3.4 830 IC Interface window
830 icon / Open
The 830 IC Interface window for parameter settings is opened by
selecting this menu option with the right mouse button or by click-
ing the
830 icon on the toolbar. It consists of three tabs Init , RS set-
tings , and Links .
Init
The Init tab of the 830 IC Interface window contains data acquisi-
tion parameters for the 830 IC Interface.