Metrohm IC Net 2.3 - Manual (Page 67)

5.3 830 IC Interface
IC Net 2.3 57
Events setup
The Events setup tab of the 830 System [#] window contains the
startup values for the seven event output lines of system 1 or
system 2 of the 830 IC Interface. These startup values are sent
each time the system is connected or a determination is started.
Each event output line can be set to the following values:
0 Line off, inactive (open)
1 Line on, active (0 V)
For technical information see 830 Instructions for Use.