Metrohm IC Net 2.3 - Manual (Page 48)

4 Systems
IC Net 2.3 38
Running Running program or chromatogram data
acquisition.
Running program
(xxx min left) Running time program with time display.
Waiting for INJECT Waiting for "INJECT" to start program
and/or chromatogram data acquisition as
defined in the Start mode.
INJECT done Injection valve has been switched to the
"INJECT" position.
Stopping Determination has been stopped.
Finished Program or chromatogram data acquisition
has been finished.
SHUTDOWN System is shutdown.
4.5.2 General error messages
Detection of hard-
ware failed Bad connection between PC and device or
device switched off (check connecting ca-
ble or switch on instrument).
4.5.3 Error messages for 761 Compact IC
LEAK DETECTED The leak detector has detected a leak
(check IC system and connections).
E1 Program checksum wrong (call Metrohm
service).
E2 RAM faulty (call Metrohm service).
E200 Invalid instrument adjustment (call Metrohm
service).
E237 Storage of configuration values failed (re-
peat last action; if error reappears, call
Metrohm service).
E238 Storage of instrument number failed (repeat
last action; if error reappears, call Metrohm
service).
E240 EEPROM faulty (call Metrohm service).
E258 Storage of setup values failed (repeat last
action; if error reappears, call Metrohm ser-
vice).