Metrohm IC Net 2.3 - Manual (Page 41)

4.3 System functions
IC Net 2.3 31
Save the current system file ( *.smt ) in the desired folder of the
Systems directory.
SYSTEM / System / Close
Close the selected system.
Delete a system
To delete an existing system, delete the *.smt file in the Systems
folder.
4.3 System functions
4.3.1 Connect and disconnect system
To make possible manual control of the system devices and start
of determinations, the selected system must be connected to the
workplace. Systems are connected and disconnected as follows:
SYSTEM / Control / Connect to workplace
Connect selected system to the workplace. Only one system from
the same system folder can be connected at the same time.
The icon appears on the toolbar. If this icon is clicked, the
SYSTEM window is always displayed in front of all other windows.
SYSTEM / Control / Disconnect from workplace
Disconnect selected system from the workplace. If a system is
disconnected, manual control is not available for this system, but
all other system settings can be modified and saved.
Start deter-
mination and Startup hardware is only possible if no other system
from the same system folder is connected. In this case, the sys-
tem is automatically connected.
4.3.2 Start/stop hardware and record baseline
SYSTEM / Control / Startup hardware (Measure Baseline)
With this menu item the following actions are executed automati-
cally:
• Send
System startup values
to the devices.
• Start Metrohm solvent delivery systems and Bischoff solvent
delivery systems.
• Start Metrohm additional modules and Bischoff additional
modules.