Metrohm IC Net 2.3 - Manual (Page 52)

5 Interfaces
IC Net 2.3 42
Click on to open the Adding interfaces to your work-
place window and proceed as described in section 5.1.1.
5.1.3 Delete interfaces
IC NET / Options / Devices setup
Open the WORKPLACE window which shows all interfaces and
devices installed. This window can be opened only by the user
with
Administrator access level. Select the desired interface and
click on to delete the interface from the workplace.
5.2 762 IC Interface
5.2.1 762 IC Interface features
The Metrohm 762 IC Interface is available as a one system ver-
sion (2.762.0010) or a two system version (2.762.0020). Each sys-
tem can control a complete ion chromatography or HPLC equip-
ment and contains the following parts:
• Two 24-bit Analog-to-Digital Converters (often abbreviated
as ADC) to acquire two analog signals from two different de-
tectors simultaneously (for example conductivity detection and
UV detection).
• One external start input.
• One start button at the interface front panel.
• RS232 communication ports to control up to eight devices
of a complete ion chromatography equipment.
• Seven Event output lines.
The 762 IC Interface is normally connected to a PC COM port us-
ing the 6.2134.100 connecting cable.
For detailed information about the 762 IC Interface see 762 In-
structions for Use.
5.2.2 762 icon on the toolbar
The 762 icon is available on the toolbar if a 762 IC Interface has
been installed with the new system wizard or by using the
device> option of the WORKPLACE window (see section 5.1.2). By
clicking this icon the 762 IC Interface window for parameter set-
tings opens.