Metrohm IC Net 2.3 - Manual (Page 120)

6 Devices
IC Net 2.3 110
E1 Start potential for sweep.
Range:
-2 ... +2 V .
E2 End potential for sweep.
Range:
-2 ... +2 V .
Rate Definition of scan rate in mV/s.
Selection:
1, 2, 5, 10, 20, 50 mV/s
Cycle mode Definition of scan cycle:
full double scan E1 ... E2 ... E1
half single scan E1 ... E2
Selection: full, half
Range Selection of measuring range:
nA 10 ... 500 nA .
µA 1 ... 200 µA .
Offset Offset of the zero point for the analog out-
put signal.
Selection:
-50 ... +50 % (in steps of 10 %)
Data rate Setting of the data acquisition rate.
Selection:
-1, 2, 5, 10 Hz
Actual
E1, E2 Display of current start and end potentials
in V.
Rate Display of current scan rate in mV/s.
Cycle mode Display of current scan cycle mode.
Range Display of current measuring range.
Offset Display of current offset.
Data rate Display of current data rate.
Send current parameters immediately to the
871 Advanced Bioscan. Parameters are not
stored in the system file (
*.smt ) as long as
the file is not saved.
Opens the 871 Scan shell window.