Metrohm IC Net 2.3 - Manual (Page 35)

3.4 Global settings
IC Net 2.3 25
Enable Always , if you use «IC Net» together with an Online IC.
In This case Method/Method setup/Export/Send data to Online has
to be checked too, for details see the Online IC instructions
for use.
User comments
Changes on methods, systems, chroma-
tograms,… :
Require Comment on changes
The user has to comment a change.
21 CFR Part 11 On Switch on/off global 21 CFR Part 11 set-
tings. Is automatically activated and cannot
be altered, if IC Net Compliant is installed.
The following parameter settings are auto-
matically set:
Data file overwrite = Never
If method changed = Ask to save
If disk method is newer = Ask to overwrite
User comments
= Require Comment
on changes enabled
GLP On = enabled
GLP On Switch on/off global GLP settings. The fol-
lowing parameter settings are automatically
set:
Data file overwrite = Never
If method changed = Ask to save
If disk method is newer = Ask to overwrite
System face
Stacked recorder icons
If this option is enabled, only one recorder
icon with different tabs appears in the sys-
tem window if several data recorders are
installed.
OK, Apply buttons mean
Save object to file If this option is enabled, the button
in system settings windows is replaced by
the
button. The system settings are
saved if the or button is
clicked.
Chromatogram units Units for chromatograms:
Flow Unit for flow rate: µ L/min , mL/min
Pressure Unit for pressure: MPa , psi , bar , atm
Print via print spooler
Switch on/off printing via print spooler.
Switch off this option if problems with print-
ing occur.