Metrohm IC Net 2.3 - Manual (Page 116)

6 Devices
IC Net 2.3 106
Actual Display of actual values.
Mode Display of current detector mode.
Oven Display of current ovent state.
Control Display of current control line settings.
Send current parameters immediately to the
871 Advanced Bioscan. Parameters are not
stored in the system file (
*.smt
) as long as
the file is not saved.
DC mode
This subtab of the Method parameters tab in the 871 Advanced Bio-
scan window contains the method parameters for the DC mode.
These values are sent and applied to the 871 Advanced Bioscan
by
Start determination and Startup hardware , or if the values are
sent manually with .