Metrohm IC Net 2.3 - Manual (Page 363)

10.2 Perform batch reprocessing
IC Net 2.3 353
Internal standard amount entered in the batch
reprocessing table.
The recalculation is done automatically if
the
Reintegrate and/or Recalculate options
are enabled. If the Recalculate only option
is enabled, the Reintegrate and Recalculate
options are disabled automatically.
Change passport If this option is enabled, those parameters
of the passport which have been changed
after clicking the
button are
applied to all chromatograms.
Open the Passport window for modification
of the passport parameters.
Only some of the passport parameters
can be modified. The passport parame-
ters
Ident , Sample Info 1 and Sample Info 2
entered in the batch reprocessing table
are overwritten if these values are modi-
fied in the
Passport window.
Modify chromatogram appearance
If this option is enabled, the chromatogram
Appearance parameters which have been
changed after clicking the
button are applied to all chromatograms.
Open the Appearance window for modifica-
tion of the settings for chromatogram axes,
labels and colors.
Make report Print report for all chromatograms using the
current report settings of the selected
chromatogram in the
Use method... field.
Open the Report options window for modifi-
cation of the report settings, see section
7.6.1.
Statistics Output of a statistics report for the chroma-
togram batch.
Open the Statistics options window for
modification of the settings for the statistical
evaluation of the data and the output op-
tions.