Metrohm IC Net 2.3 - Manual (Page 135)

6.10 709 IC Pump
IC Net 2.3 125
6.10 709 IC Pump
6.10.1 709 IC Pump features
The Metrohm 709 IC Pump is a serial dual piston high pressure
pump for ion chromatography. The two following versions are
available:
• 2.709.0010 IC Pump (standard version)
• 2.709.0110 IC Pump (metal-free version)
The 709 IC Pump, which is normally operated using the keypad of
the instrument or via 732 IC Detector, can be fully operated using
the «IC Net» program. It can be connected either to the 732 IC
Detector using the 6.2125.060 cable, to the 762 IC Interface using
the 6.2134.080 or 6.2134.090 cable, or to a PC COM port using
the 6.2134.040 or 6.2134.100 cable. If it is connected to the 732
IC Detector, the
709 Isocratic pump for 732 device must be selected
for the installation of the 709 IC Pump in a system. If it is con-
nected to the 762 IC Interface, the
709 Isocratic pump device must
be selected for the installation of the 709 IC Pump in a system.
Examples for interconnections with the 709 IC Pump can be
found in the 762 Instructions for Use.
The cable connection between 709 IC Pump and 732 IC Detec-
tor, 762 IC Interface or PC must be made before switching on
the instrument. In order to operate the 709 IC Pump with «IC
Net», the external control must be switched on using the [ Ext. ]
key.
For detailed information about the 709 IC Pump see 709 Instruc-
tions for Use.
6.10.2 709 IC Pump icon
The 709 icon is available in the SYSTEM window if an 709 Isocratic
pump or an 709 Isocratic pump for 732 has been installed with the
New system wizard or by using the Setup/New devices/Install new de-
vice option of the SYSTEM window (see section 6.1.2).
If the system is connected and the 709 icon is clicked with the
right mouse button, the following menu appears:
Open
Open the
709 IC Pump
window for parameter settings
(this window can also be opened by double-clicking
the icon).
Unlink Delete the 709 icon from the system.